Tajima embroidery — our standard setup holds 16 thread colours per head
Four decoration methods under one factory roof. We embroider, screen-print, heat-transfer and sublimate logos onto custom workwear — from single-colour chest marks to all-over photographic prints. Free digitizing on first orders under 1,000 pieces. MOQ 100 pcs per design and colour.
We do not outsource decoration. 16 Tajima embroidery heads, 4 screen-print stations, HTV and sublimation all sit on-site. That means your logo passes through one QC team — the same one that inspects the garment.
Machine embroidery with 16 thread colours per head. Ideal for chest logos, cap embroidery, name patches and back-panel branding. FR-rated thread available for safety garments.
| Best for | Polos, shirts, coveralls, jackets, hats |
|---|---|
| Durability | Excellent — outlasts the garment, survives industrial wash |
| MOQ | 100 pcs (stitch setup spreads across the order) |
Water-based or plastisol ink on flat surfaces: chest prints, back panels, sleeve prints. Up to 6 spot colours. Sharp edges on smooth fabric like tees and polos.
| Best for | T-shirts, polos, hi-vis vests (flat panels) |
|---|---|
| Durability | Good — cure-dependent; plastisol holds through 50+ industrial washes |
| MOQ | 100 pcs (screen setup fee spreads across the run) |
Reflective logo transfers for hi-vis, full-colour DTF for small runs, and name personalization strips. Quick setup, low barrier — ideal for limited-edition or name-drop programs.
| Best for | Reflective hi-vis logos, small runs, personalised name drops |
|---|---|
| Durability | Moderate — good for front-of-house, less suited to heavy industrial wash |
| MOQ | 100 pcs (per-design setup minimal) |
Dye bonds into polyester fibres — no hand-feel, no cracking, no peeling. Full-colour photographic prints edge-to-edge. Requires polyester fabric and light base colours.
| Best for | All-over sportswear, cycling kit, team polos, event apparel |
|---|---|
| Durability | Permanent — dye is in the fibre, lasts the life of the garment |
| MOQ | 100 pcs (paper roll cost; economical at 200+ pcs) |
Vector file: .AI, .EPS, .CDR, .PDF — for embroidery digitizing and screen separation. Raster (.PNG, .JPG) accepted with a note on resolution.
Mark the position: left chest, right chest, centre front, centre back, left sleeve, right sleeve, or full back. We provide a placement photo at sample stage.
Logo dimensions in cm or the standard reference on the body. Chest emblems are typically 6–9 cm wide; back prints 25–35 cm wide.
Pantone references for thread, ink or transfer film. We match against the fabric lab-dip so the logo reads correctly against the garment colour.
Tajima embroidery — our standard setup holds 16 thread colours per head
| Dimension | Embroidery | Screen Print | Heat Transfer | Sublimation |
|---|---|---|---|---|
| Best substrate | Cotton, poly-cotton, twill | Smooth flat surfaces | Most fabrics | 100% polyester only |
| Wash durability | Excellent (100+ cycles) | Good (cure-dependent) | Moderate | Permanent (in-fibre) |
| Colour count | Up to 16 threads | Up to 6 spot colours | Full colour | Full colour / photographic |
| Hand-feel | Raised, premium | Minimal texture | Slight film feel | Zero — no layer |
| Ideal MOQ | 100+ | 200+ | 100+ | 200+ |
| FR-compatible | Yes (FR thread) | Limited | Yes (reflective) | On FR polyester |
Email your logo file and tell us the garment, placement and quantity. We return a digitized stitch preview or a screen mockup within 2 business days — with a costed quote for the full run.
Or email [email protected] directly with your logo attached